K-Type Thermocouple Wire Digital Thermometer Temperature Sensor Probe
- List PriceUS$2.06piece
- Sale PriceUS$2.06piece
- ShippingFree Shipping
● This is a reliable k-type wire thermocouple TC-1 with a standard k-type sensor. The sensor bead is at the tip of a 3 ft long wire probe, which has a green FEP plastic coating. This teflon FEP based insulation is easier to clean than fiber glass insulation and can be used up to 399 degree Fahrenheit, or 204 degree Celsius. The thermocouple has a miniature k-type connector that will work with digital K-type thermometers of many manufacturers, such as Fluke, Omega, Testo, BK Precision, and Nicety.
● This k type thermocouple is made from very thin k-type sensor wire, the thermocouple wire diameter is approximately AWG 29 (0.011 inch or 0.28 mm), this will give you very quick temperature readings.
● This probe can used to measure air or gas temperatures, it can be attached to pipes or embedded into objects you want to measure. It also can be used in non-corrosive liquids, such as water that does not have much salt or acid in it.
Thermocouple: K-Type ( chromel / alumel )
Temperature Range: -58 to 399°F (-50 to 204°C)
Wire thickness: AWG 29, 0.011 inch, 0.28 mm
Wire insulation thickness: oval, 0.05 by 0.075 inch (1.2 by 1.9 mm)
Bead Diameter: 0.03 - 0.07 inch (0.7 – 1.7 mm)
Miniature K-Type connector, two flat blades, 7/16" (10mm) from outside pin to outside pin, pins are flat, spade type
Wire Length: 90cm
1 x K-Type Thermocouple Wire Digital Thermometer Temperature Sensor